Lightning Protector 1/4 Wave, 800-2500MHz

Description

Lightning Protector. 1/4 wave stub technology, 800-2500MHz. N Male – N Female.

Broadband and narrowband units available

Maintenance-free
Highest surge current handling capability
– N: 50 kA (8/20 μs test pulse)
– DIN 7/16: 100 kA (8/20 μs test pulse)
Lowest residual surge pulse voltage and energy
Best IM performance
DC/AC powering via coax not possible
Products with integrated high-pass filter with even further reduced residual pulse (series 3407) available
Multi-band operation
The protector can also be installed reversely
Compliant to IEC 61643-21

Technical Description
RF Protector Description	Quarter-wave stub technology
Highlights	Multi-band operation The protector can also be installed reversely Compliant to IEC 61643-21
Gas Tube	No DC / shorted QW or LC
2002/95/EC [RoHS]	compliant
2002/96/EC [WEEE]	no special marking needed
Assembly Configuration
Main Path Connector	unprotected side (Port1) - N «plug (male)»
	protected side (Port2) - N «jack (female)»
Electrical Data
Impedance	50 Ω
Residual Pulse Energy	test pulse 4 kV 1.2/50µs / 2 kA 8/20µs - 5 typ. µJ
Current Handling 8/20	test pulse 8/20µs - 50 multiple kA
	Range 1	Range 2	Frame
Frequency range	806 to 960 MHz	1710 to 2500 MHz	806 to 2500MHz
Return loss	≥ 26 dB	≥ 26 dB	≥ 20.8 dB
Insertion loss	≤ 0.15 dB	≤ 0.15 dB	≤ 0.15 dB
CW power	≤ 1000 W	≤ 500 W	≤ 500 W
PIM 3rd order	-150 dBc typ.	-150 dBc typ.
Environmental and General Data
Operating Temp min.	-40° C
Operating Temp max.	85° C
IP Rating	according to IEC 60529, data refer to the coupled state - IP 65
Weight	400g
Number of Matings	500
Material Data
2002/95/EC [RoHS]	compliant
2002/96/EC [WEEE]	no special marking needed
Piece part	Base material	Plating
Body	Brass
Port1 Centre Contact Material	Brass	Gold Plating (without Nickel underplating)
Port2 Center Contact Material	Copper Beryllium Alloy	Gold Plating (without Nickel underplating)
Other Information
Data Sheet
Mounting Instruction